Custom Scenery Exchange / Coaster supports

Hey guys.I need some 3/4 stuff.Would you have any of the following:

3/4 wooden coaster supports
3/4 diagonal steel coaster supports
B&M inverted coaster supports
3/4 B&M inverted coaster supports

additionally..good tunnel entrance/exit pieces (ala voyage)

Thanks!

what do you mean with 3/4 ?

exactly my thought.
Why don't you use Toon's Supports?

and by "tunnel entrance"? do you mean for paths? or tracks?

3/4...aka the widest of the turn tracks...

for tunnels, i meant tunnel walls

thanks!!!

TMK created a set of wooden support structures that will work with the turns on just about any of the larger wooden coasters. As for the steel supports, you just need to look at what's available by Toon, DovePete and a few others that I can't remember offhand. Many of these will work on the 3/4 turns you're talking about.

If you check out the Object Creators List, you'll find links to Toon's site. If I remember correctly, DovePete's supports are available at RCT Revalutions which is also listed in the Object Creators List.

As for the tunnel walls, what are you looking for? The tunnel walls that currently exist in the game, or something else. You can use land blocks to create a tunnel entrance and then line the 'tunnel' walls with the walls you want to use.

Edited by Rohn Starr, 23 June 2006 - 11:57 AM.

Thanks for all the responses guys.I'm fairly new here...who is TMK? Where do I download his supports from?

Check the Object Creators List!
[check my sig for the link to that] I realize you're new here, but ya gotta learn to read the posts fully, you'll find a lot of information in them.

Hehe I realized it as soon as I hit the add reply button!

Lastly,as soon as I download it, I save to the OBJ DATA folder of RCT and it should be there in the scenario editor right?

Thanks!

If I remember correctly, he posted them in a scenario, so you would put it in your scenarios folder. If the supports don't install, which is a possibility, check RCT Revalutions to see if they're available there. If you can't find them anywhere, PM me your email address and I'll send them to you.

I Pmd you my address...thanks

Hi.I downloaded the support pack of TMK.While i did see the 3/4 wooden supports, it doesn't seem to blend seemlessly with the regular wooden coaster supports.I mean the supports are not able to look like one continuous support structure...

This picture is what I mean...

http://www.rcdb.com/....htm?picture=24

There is no break in the fluidity of the supports even on turns.Has anybody tried to attempt creating good realistic looking supports for the turns be it 1/4 1/2 or 3/4?

Thanks.

The number of objects you would need would make that impractical. Take what you can get and roll with it. A little creativity on your part can compensate for what you don't have.

-ACE

I see what you mean.However, I was also thinking that what would be need are "gap fillers" to wedge from one support block to the next (from a straight support block-to a curved one-back to a straight support block).

Is it as simple as this or is there more to this than I'm seeing?

Edited by Aphroquincunx, 25 June 2006 - 09:11 PM.

In line with my incessant request for supports...does anybody have a horizontal pipe section for B&M invert supports? That's the one that holds the lift hill from the top.

Second, does anybody have B&M invert supports in general?

Thanks in advance!

if you download the Blue Thunder design, you get the whole set of toon's new supports. they're pretty sweet.

Got a link to it? Thanks

http://www.nedesigns...ne=designs&s=bt

Hi...so when you download this, it gets saved in the objdata automatically?

when you load the park it will.