Custom Scenery Exchange / nicman's Object Library

Welcome to my object library. Here I will post all of my custom objects that can be downloaded below. I have a few ideas on my mind, so make sure to follow this topic so you are notified of new objects.
 
Also if you have any requests, please post a comment.
 
1. Diagonal B&M Steel Support-Horizontal-Connector
 
 Design 2017-01-06 11-19-52.png (12.76KB)
downloads: 20
 
I have seen some parks such as Bush Gardens Asia, that could have used this object and I needed it for my park, so I decided to put in a little effort and make it.
 
   Busch Gardens Asia 2017-01-06 11-30-58.png (5.08KB)
downloads: 21
 
You can download it here------>  NH-HC-SP.DAT (1.82KB)
downloads: 11
 
2. 1/4 Roof (Shingles, Shaded) -cjk
 
 pic (2).png (7.28KB)
downloads: 13
If you have ever used this pattern made by cjk, you will find out that he never made a 1/4 size of it, so I decided to make it.
 
You can download it here----->  NH-SH-RF.dat (2.12KB)
downloads: 13
 
3. The third object is simply a time saving support. Its 1/4 size with 4 clearance.
 
 pics.png (2.34KB)
downloads: 7
 
You can download it here----->  NH-SP-4C.DAT (2.3KB)
downloads: 10
 
4. The fourth object is a colorable 1k control box with different positioning to allow it to be placed in areas were the original one was not able to.
 
As you can see in the picture below the object is able to be placed on that deco block with correct positioning unlike pic 2 with the original control box.
 
 Design 2017-01-24 13-43-03.png (16.32KB)
downloads: 8
 
 
 Design 2017-01-24 13-50-28.png (2.89KB)
downloads: 22
 
Here is an example in one of my favorite parks:
 
 Busch Gardens Asia 2017-01-24 13-59-42.png (12.98KB)
downloads: 21
 
 Busch Gardens Asia 2017-01-24 14-00-21.png (10.6KB)
downloads: 18
 
You can download it here----->  NH-C2-BX.DAT (2.08KB)
downloads: 15
 
5. (fixed) I made a 4x height of the custom base magnus very similar to the Six Frags Pole, except this one is compatible with the regular custom base. The reason why I created this object is to save time when I make supports out of the custom base magnus object.
 
 Design 2017-01-24 16-12-34.png (857bytes)
downloads: 11
 
 Design 2017-01-24 16-17-07.png (7.13KB)
downloads: 9
 
You can download it here----->  NH-CB-4F.DAT (1.88KB)
downloads: 8
 
6. This is a another support that I used for my park, it is simply a version of another support with a ring:
 
 Design 2017-01-26 10-37-59.png (5.2KB)
downloads: 8
 
You can download it here----->  NH-SP-CN.DAT (5.14KB)
downloads: 7
 
7. This object took me the longest to make, and probably one of the most useful, it is a full tile corrugated roof with a wood-like texture.
 
 Design 2017-01-27 16-13-42.png (24.26KB)
downloads: 9
 
You can download it here----->  NH-CR-RF.DAT (12.93KB)
downloads: 12
 
8. This is a foliage underbrush object that I created for my park, the style is alpine.
 
 Design 2017-01-31 14-24-56.png (20.51KB)
downloads: 9
 
You can download it here----->  NH-AP-UN.DAT (7.52KB)
downloads: 18
 
9. A fixed/improved version of the umbrella of GForce. This one is taller and has a better umbrella:
 
 Design 2017-02-04 11-07-41.png (4.51KB)
downloads: 10
 
As you can see here, my object on the right, compared to GForce's closed and open one.
 
 Design 2017-02-04 11-16-54.png (13.65KB)
downloads: 8
 
You can download it here----->  NH-TABLE.DAT (16.37KB)
downloads: 17
 
10. This is a 1/2 tile B&M Support that has 4 clearance:
 
 pic (4).png (1.42KB)
downloads: 8
 
You can download it here----->  NH-SPN3.dat (18.8KB)
downloads: 6
 
11. This is a foliage underbrush object that is 4 tiles big:
 
 Design 2017-03-11 21-28-17.png (9.05KB)
downloads: 23
 
You can download it here----->  NH-UBRS2.DAT (21.21KB)
downloads: 17
 
12. This is a hydraulic launch piece, as was originally intended to be implemented into openrct2, but since most people prefered a LIM one, I decided to turn this into a scenery object. 
 
NOTE: If you want to view my other LIM sprites such as the giga ones http://www.nedesigns...dragon-project/, check out the booster sprites in openrct2.
 
 hack park 2017-04-27 19-56-25.png (12.23KB)
downloads: 20
 
You can download it here----->  NH-HYTRK.dat (9.27KB)
downloads: 11
 
All the objects below are all of my requested ones, I figured I might as well post them as some people might find them useful.
 
1. a. 1 Colorable Centered Seat as you can see in this picture, the one on the right compared to the one on the left (the 1k version which is a double seat)
 
 Six Flags 2017-03-19 19-20-33.png (3.93KB)
downloads: 12
 
 NH-SEAT.dat (913bytes)
downloads: 11
 
1. b. A custom Lamp made for FredD    NH-LAMP.dat (17.04KB)
downloads: 10
 
 NE Workbench 2017 by Louis! 2017-03-31 15-13-34.png (4.9KB)
downloads: 9
 
1. Custom Gate  NH-GT-1.dat (14.23KB)
downloads: 11
 Emerald Pointe 2017-03-04 19-09-39.png (2.52KB)
downloads: 10
 
2. Custom Table  NH-TABL2.dat (13.17KB)
downloads: 11
 Emerald Pointe 2017-03-04 19-12-06.png (2.67KB)
downloads: 10
 
3. 30 Clearance 1/4 Pipe  NH-30-PI.dat (64.52KB)
downloads: 7
 
4.  30 Clearance 1/2 B&M Support  NH-SPN2.dat (132.64KB)
downloads: 7 
 
5. Colorable Go-Kart  NH-KART.dat (1.32KB)
downloads: 8
 Emerald Pointe 2017-03-04 19-21-38.png (2.55KB)
downloads: 9
 
6. Colorable Support Structure  NH-SP-SF.dat (18.54KB)
downloads: 6
 Emerald Pointe 2017-03-04 19-29-33.png (4.24KB)
downloads: 7
 
7. 30 Clearance Support  NH-SP-30.dat (11.77KB)
downloads: 7
 
8. This is a corner castle piece made by Liampie and me.
 
 NH-LMPCR.dat (4.81KB)
downloads: 8
 
 hack park 2017-05-03 21-51-46.png (14.31KB)
downloads: 4
 
9. Similar to the one above also made by Liampie and me expect this one is a inner corner.
 
 NH-LMPC2.dat (6.93KB)
downloads: 7
 
 hack park 2017-05-03 22-04-22.png (15.66KB)
downloads: 4

 

10. Grated 1/4 Path for Gamma.

 

 NH-GR-PT.DAT (1.73KB)
downloads: 7

 

 Design 2017-05-19 15-55-32.png (6.14KB)
downloads: 4

 

11. 8 Units B&M support 1/4 tile

 NH-SPN8.dat (3.56KB)
downloads: 3

 

12. 8 Units B&M support 1/2 tile

 NH-SPN82.dat (36.31KB)
downloads: 3

Edited by nicman, 05 November 2017 - 10:50 AM.

The second one looks kinda weird from the thumb. What does it look like when you turn it into a complete roof, in combination with other objects?

Here is were the object was used: It works well when using the same pattern as the other cjk roofs.

I just updated the objects, i fixed the pixels on the roof, and fixed the positioning and clearance for both objects.

So now there are two versions with the same DAT-name floating around?

I prefer not to change the DAT name - if you're careful to also leave the checksum unchanged, it can be advantageous because it makes the two objects interchangeable, so people don't need to keep the old one around just to open parks that use it.

So now there are two versions with the same DAT-name floating around?

 

There was only a few downloads I believe, but anyway, when you install it, it should just overwrite the existing object. 

Yup, definitely a "Maxbox" case

Just added a few more objects, hope you enjoy them!

Cool stuff.  Always nice to have optimization-type objects in this era of scenery limit being a regular concern.

[ntamin22' timestamp='1485366666' post='714033']

Cool stuff.  Always nice to have optimization-type objects in this era of scenery limit being a regular concern.

 

You mean the object limit?

 

If so, I still don't understand how they would save objects.

1 object that takes up the map data of 4.

Not the selection limit, the placed limit.

1 object that takes up the map data of 4.

Not the selection limit, the placed limit.

 

So you could pretty much create an entire object of a custom building or something to save space.

If it's more than a tile it uses up 1 map element per tile occupied. But otherwise, yes you can, there are several buildings in the vanilla game.

Would you be open to making less steek b&m supports?

Would you be open to making less steek b&m supports?

 

 

You mean less steep?

Yeah, sery... autocorrect

Yeah, sery... autocorrect

 

How much less steep? I could try to make them, but Ive never draw my own sprites before from scratch though, I only have modified existing objects. But the pattern for supports seems pretty basic so maybe I could give it a try.

Right it's only very steep or horizontal... something in between for low turns Would be really cool to have

Massive updates to the objects.

 

@BelgianGuy, Sorry but I dont think I have the skill right now to pull something off like that.